Due to the slanted nose piece which is placed outwards, the K2 model is ideally suitable for rifle shooters and archers with an extreme firing position. The shifted attached nose piece (makes it possible to aim), with an extreme slant over the nose without disturbing pieces getting in the sight line The new K2 model can be customized individually. Because of the interchangeable nose piece, the glasses are suitable for both right- and left-handed shooters. The nose piece is height-adjustable. This model includes a lens holder (23 mm or 37 mm). Additional lens holders for three position shooting are available with color coding. This allows a quick differentiation between standing, prone and kneeling positions. The shooting glasses lens (23 mm) can be individually adjusted or quickly and easily attached with a clip-on-holder (23 mm). Advantages: quick change system and easy handlingMaterial: Nickel silver ruthenium, coated, high-grade steel, silicon, ThermoplastThese glasses are available, according to the prescription , for right or left aiming shooters. They are delivered as a standard type with a 23 mm lensholder and a 165 mm ear piece. You can choose between the standard or 37 mm lensholder and ear pieces of different lengths

All Knobloch frames are suitable for standard iris, eyeshield and polarised filter accessoriesOur top model is a result of over fifty years of development in the fabrication of shooting glasses. Exact fit, the best material and exact detailed workmanship distinguish this top product. The K1 is suitable for all disciplines. It has a height adjustable nose piece. Lensholder and case are included. They can be delivered with a choice of a big (37 mm) lensholder or a small (23 mm) lensholder. The ear piece length (from 150 mm-180 mm) can be chosen individuallyMaterial: Nickel silver ruthenium coated, high-grade steel, silikon, thermoplastHeight adjustable nose piece: 35-50 mm  332N23 K1 model: with 23mm lens holder and height adjustable nose-bridge 332N37 K1 model: with 37mm lens holder and height adjustable nose-bridge (image 3)

The K5 is a special pair of shooting glasses for two handed shooting, for large caliber, trap and skeet. They have an adjustable nose piece and can therefore be placed very high, so that e.g. with trap and skeet shooting, the glasses don’t come into contact with the gunMaterial: Nickel silver with colour layer, high-grade steel, silicon and PVCBecause of the new Clip function the different filters can easily and quickly be put in front of the glasses so that they can be adapted to different light conditions. When necessary it is possible to attach a supplementary cover disk as well as an iris diaphragm

The K3 is a good and reasonable offer from Knobloch for beginners. It is suitable as a second pair of glasses, or for young people and newcomers. It has less individual adjustments, a fixed nose piece and is only equipped with one carrying barHowever it still fulfils the necessary needs of a pair of shooting glasses and is good workmanship. This model can also be used with different lensholdersMaterial: Nickel silver ruthenium-plated, high-grade steel, silicon, Thermoplast

For shooting frames Unique adjustable: Length-adjustable (setting range aprox. 40mm) Height-adjustable (setting range aprox. 35mm) Sides-adjustable (setting range aprox. 20mm)Available in different colours338T-N transparent338W-N white 338S-N black

Complete with mount 367I.S.S.F. 30mm 339S-N black 339T-N translucent 339W-N white

Clip directly on to lens holder 340: 37mm fitting 340-K: 23mm fitting

37mm clip-on iris With translucent mount

Push on to your lens holder to assist alignment 344: 37mm fitting 344-K: 23mm fitting

Filter can be used with a clip-on filter holder Following options of filter are available in both diameters: Yellow, orange, amethyst, green, brown, light grey, plus a non adjustable polarising lens 351-23: ø 23mm 352-37: ø 37mm

Clip-on filter housing for 351-23 or 352-37 The housing clips over the lens holder and then the lenses clip into the holder 351T23: 23mm 352T37: 37mm

Includes 367 clamp 354: 23mm holder with optimum adjustment (image 1) 342/23: 23mm (image 2) 342/23GK: 23mm with stepped shaft (image 3) 342/37P: 37mm for accessory mounting (image 4)

367: for accessories or lens holder 367-S: for two accessories at once