300 & 300P Gehmann frames
300 with 23mm lens holder (image 1) 300P with 37mm lens holder (image 2) Finished in attractive matt silver Adjustable side-bars Setting the width of your face to our frames is done by locating the sidebar in one of three holes at the end of the crossbar Comfortable, soft sprung earpieces Sliding mount sets holder position on the crossbar plus up or down angle 23mm (300) or 37mm (300P) lens holders can be easily rotated in the top mount The nose-bridge is adjustable for height Silicone nose piece is width adjustable 300P with optional components (image 3) Supplied in free carry case 985 (image 4)
300P Gehmann frame
300P with 37mm lens holder Finished in attractive matt silver Adjustable side-bars Setting the width of your face to our frames is done by locating the sidebar in one of three holes at the end of the crossbar Comfortable, soft sprung earpieces Sliding mount sets holder position on the crossbar plus up or down angle 23mm (300) or 37mm (300P) lens holders can be easily rotated in the top mount The nose-bridge is adjustable for height Silicone nose piece is width adjustable 300P with optional components (image 3) Supplied in free carry case 990 (image 4)
301 Flip-up eyeshields I.S.S.F.
30mm width so compliant with I.S.S.F. rulesincluding clamp 305 301S-N black 301T-N translucent white 301W-N white
313 Universal mount for Gehmann frames
Enables lens holder to be manoeuvred to a greater number of different positions
340 Clip-on irises for shooting frames
Clip directly on to lens holder 340: 37mm fitting 340-K: 23mm fitting
344 Centering devices
Push on to your lens holder to assist alignment 344: 37mm fitting 344-K: 23mm fitting
390 Gehmann clip-on iris for ordinary glasses
Improves depth of field vision for a clearer rearsight and foresight picture but allowing use of your own glasses for distance The iris is sprung-mounted on its plate to allow accurate positioning of the iris for quick and perfect alignment Iris leaves with our latest surface coating to eliminate oxidation and to preserve the matt black anti-glare finish Clips to your glasses with a spring loaded rubber clamp Can be easily flipped up (and stays up) for normal vision
391 clip-on eyeshield white
Attaches as 390 Can be flipped up for normal vision Suitable for right or left hand shooters
391-30N & 391S-30N Clip-on eyeshields
Designed to match 390 For use by right or left handed shooter Clips to your glasses with a spring loaded rubber clamp Can be easily flipped up out the way for normal vision 391-30N translucent white, I.S.S.F. 30mm 391S-30N black, I.S.S.F. 30mm
391S Clip-on eyeshields black
Designed to match 390 For use by right or left handed shooter Clips to your glasses with a spring loaded rubber clamp Can be easily flipped up out the way for normal vision black also available: 391 translucent white
392 3-colour filter set for 390
A set of push-in colour filters for clip-on iris 390 above Improves sight picture and enhances black and white target contrast Colours: Yellow, orange and grey
393 Gehmann stick-on iris for ordinary glasses
A mini stick-on iris for use on ordinary glasses Improves depth of field Exceptionally lightweight Iris can be radiused round the sticker and rotated around its support post Iris adjusted with a simple twist of its body Exceptional quality at an attractive price
501 Lens holder for later Gehmann irises
23mm lens holder allows a prescription lens to be fitted eye-side of your rearsight manufactured exclusively for our own latest irises with a detachable front thread and not carrying our 1.5x magnified diopter The detachable steel front thread of your iris is removed with the factory spanner 501's adaptor thread is then screwed into the front of your Gehmann iris 501, now with your iris mounted, is screwed into your rearsight after loosening the rail carrier's allen screw Mount your prescription lens in the lens holder which may be slid off the rail for easier assembly Reposition the lens holder on the rail as required and lock it in place Positioning of the assembly on your rearsight is easily set as the attachment boss has radial adjustment and is simply secured with the allen screw located in the front body
501-A Lens holder for all irises
23mm lens holder allows a prescription lens to be fitted eye-side of your rearsight For all other manufacturers irises and our own earlier versions that didn't have the ability to remove the front attachment thread Mount your prescription lens in the lens holder which may be slid off the rail for easier assembly Reposition the lens holder on the rail as required and lock it in place Positioning of the assembly on your rearsight is easily set as the attachment boss has radial adjustment and is simply secured with the allen screw located in the front body