B100 Bauer Poseidon PE100 compressor
A must-have mobile compressor with compact dimensions and low weight for all those wishing to have a compressor with the legendary Bauer reliability at best price-performance ratio. Due to its low weight, compact design and small dimensions the PE100 is easy to transport. For 200 or 300 bar refilling of cylinders and bottles High quality air and moisture filters Weight: 44 kgs Height: 42cms Width: 35cms Length: 66cms Fill rate: 100 l/min Motor: 2.2kW/3.0hp Rpm: 2300 Fill time: 2 min/l 230V providing 200 or 300 bar charging (please specify) For charging 200 and 300 bar cylinders the 300 bar compressor version plus B305 multi-fill switch panel are needed
B305 Multi-fill switch panel - 200/300 bar
For charging up to three 200 or 300 bar cylinders Easily connected to all Bauer compressors
B400 Bauer Junior II compressor
A compact mobile compressor suitable for all applications Can be used satisfactorily for refilling large volume master bottles Safety relief valve system Filtration provides breathing-air quality eliminating concerns over long-term internal damage to expensive weapons Worldwide support through Bauer and Gehmann distributors Weight: 46 kgs Height: 42cms Width: 39cms Length: 66cms Fill rate: 100 l/min Motor: 2.2kW/3.0hp Rpm: 2300 Fill time: 2 min/l 230V providing 200 or 300 bar charging (110V/ 60 Hz option available - please specify) 300 bar compressor version and B305 multi-fill switch panel is needed for charging 200 and 300 bar cylinders
FX400 Flexi hose assembly
Charging kit with manometer, including particle filter and pressure release screw, for all FX weapons using our quick-fill probe (MK I)
FX401 Flexi hose assembly
Charging kit with manometer, including particle filter and pressure release screw, for all FX weapons with both adaptors (MK I & MK II) in addition: it fits on other different weapon models
M100 Gehmann easy-prime 200-bar, 4-stage 'Turbo-Pump'
With special sinter filter New generation patented high-pressure pump with manometer The M220 has been revised and improved with a new 4-stage valve and compression system Built of robust and corrosion free materials Commence pumping with the 4-stage technique to about 150 bar then change to 3-stage and carry on until your cylinder is up to pressure Switching stages is located between handles 4-stage operation provides 280cc per stroke 3-stage operation provides 210cc per stroke Blue-black Comes with pressure gauge, standard 200 bar 5-thread DIN connector, suitable for all common sporting weapons (e.g. Feinwerkbau, Morini, Steyr, Walther etc.) and condensation bleed valve Air cartridge and weapon specific adaptor are not included
M100-Hose Gehmann easy-prime 200-bar, 4-stage 'Turbo-Pump'
With special sinter filter New generation patented high-pressure pump with manometer The M220 has been revised and improved with a new 4-stage valve and compression system Built of robust and corrosion free materials Commence pumping with the 4-stage technique to about 150 bar then change to 3-stage and carry on until your cylinder is up to pressure Switching stages is located between handles 4-stage operation provides 280cc per stroke 3-stage operation provides 210cc per stroke Blue-black Comes with pressure gauge, 1/8" hose connector and condensation bleed valve Air cartridge and weapon specific adaptor are not included
M220-Hose Gehmann easy-prime 200-bar pump (3-stage)
With special sinter filter at base Even easier child friendly priming system Detachable and reversable footplate Pressure gauge can be easily viewed in use With condensation bleed valve 210cc volume of air per stroke Blue-black 1/8" hose connector Air cartridge and weapon specific adaptor are not included
M221 5 litre refill air bottle
5 litre 200 bar (tested to 300 bar), anti-roll handle and DIN connector M225 with manometer
M222 5 litre refill air bottle
5 litre 200 bar (tested to 300 bar), anti-roll handle and DIN connector M225
M225 DIN connector
DIN 200 bar standard with five threads Accepts all 5-thread DIN weapon adaptors With manometer and air bleed allen screw
M225-300 DIN connector
DIN 300 bar standard with five threads Accepts all 5-thread DIN weapon adaptors With manometer and air bleed allen screw