art.-no.: 120N for 100 metre small-bore rifle & 50 metre free pistol |
.jpg)
|
- for 230V mains (110V available)
- a self contained target changer complete with one 110 metre drum of cable and one shooter´s control switch for forward and reverse drive of the target band if for 50 metre small-bore rifle guide plate 126 is needed (extra)
- 124 x 63 x 41 cms, weight 66 kg, bullseye 70 cms from ground
|
art.-no.: 124 50 metre free pistol target band |
.jpg)
|
- 100 serial numbered targets in one band
|
art.-no.: 125 target repair stickers for above |
.jpg)
|
- 100 bullseyes only to suit the above
|
art.-no.: 130 for larger calibers |
.jpg)
|
- supplied without bullet trap
- as 120 but without either cable or switch
|
art.-no.: 131 target changer 50 metres or more |
|
- for 230 V (110 V option available)
- one unit with 55 metre drum of cable and one shooter´s control switch to feed the next target
- for 50 metre rifle or 50 metre free pistol
- 100 metre extension cable available (extra)
- feeds up to 100 targets from the top hopper
- shot cards drop to the bottom collector
- spent bullets lodge in the rear trap
- 148 x 60 x 57 cms, weight 80 kg
- bullseye 90 cms above ground
|
art.-no.: 170 range video-system |
.jpg)
|
- operates on 230 V mains supply
- comprising rain-shielded video camera, pivot mount, 100 metres of cable and one video screen
- can be used for training with one or two individuals or as a means of monitoring small groups
- ideal for self-scoring using Gehmann model 110 and 120 changers without need to scope shots
- ideal for the club where non-participant spectators get a chance to see scores developing
- can be used as an aid to inspire spectators to participate
- easily expanded with additional cameras (extra)
|
art.-no.: 180 manual air rifle target changer set |
|
- comprises a manually operated rotating drive wheel with V-belt to the target transporter drive which is operated by the shooter. Includes pellet trap with target holder and running cords. Suitable for standard size rifle targets with installation against a safe backstop area
|
art.-no.: 180LP manual air pistol target changer set |
.jpg)
|
- as 180 but with larger pellet trap - can be used for rifle
|
art.-no.: 182 electronic target changer set |
|
- interchangeable target holder for air rifle and air pistol only
- the 230 V motor can be instantly switched from forward to reverse and is fitted with a sensor to reduce from fast to slow drive with minimal target travel prior to turn-around
- especially silenced pellet trap to assist competitors
- wired for installation without lighting
- a modification is available for crossbow
|
art.-no.: 187,188, 189 & 191 air weapons target holders |
|
- for either air rifle or air pistol these traps are made in 1 mm thick metal and contain a 3 mm pellet backstop
187 for air rifle targets: 10 x 10 cms 188 for air pistol targets: 17 x 17 cms 189 for air rifle & air pistol: 14 x 14 cms
|
